Status to feed
The meter knows the consumption, the controller the state. Status to feed brings both together: how much energy flowed into production, how much into setup, how much into standstill — and how much into order 4711?
In eco2lot, status to feed links two data points: a status or assignment data point (machine status, order, batch, product, production lot) and a continuous meter (electricity, gas, water, heat). eco2lot considers both time series together and determines how much was consumed during the respective status: production 320 kWh, setup 45 kWh, standstill 28 kWh, fault 12 kWh. Likewise, energy consumption per order, gas consumption per batch or water consumption per product arise.
The calculation scheme
What is inside status to feed
What status to feed is
- The assignment of a consumption to the status or assignment value active at the time
- Data point A: status (production, setup, standstill, fault) or assignment (order, batch, product, lot)
- Data point B: continuous meter for electricity, gas, water, heat, compressed air
Your benefitThe consumption gets a context — and thus someone responsible.
Which data it uses
- The status history with all changes
- The meter reading with timestamps
- Both time series are overlaid in time
Your benefitTwo data points that are usually already there.
What eco2lot calculates
- Energy consumption during production, setup, standstill, fault
- Energy consumption per order, gas consumption per batch, water consumption per product
- Per shift, day, week, month, year
- Every result as a data point of its own
Your benefitOne meter becomes as many consumption values as there are states.
What benefit arises
- Quantify standstill and idle consumption
- Energy costs per order or batch for calculation and post-calculation
- Compare products by energy intensity
- Evidence for customers who ask for the CO₂ footprint per product
Your benefitEnergy becomes attributable to an order — like material and working time.
Afterwards you can …
-
You know how much energy flows into production, setup, standstill and fault.
-
Energy consumption and energy costs per order, batch or product are available with evidence.
-
Idle consumption becomes visible — and with it the shutdown rule becomes justifiable.
What you should know about status to feed
What does status to feed mean?
A status or assignment value (machine status, order, batch, product) is linked with a continuous meter. The result is the consumption per status or per order, batch or product.
Can I assign energy to an order or a batch?
Yes. Instead of the machine status, the order number, batch number or product identifier is used as the assignment data point. eco2lot determines the consumption during every active order.
Where does the status or order data point come from?
From the machine controller, a shop floor data collection system, the ERP or MES — via the interfaces of eco2lot (OPC UA, MQTT, Modbus, REST). A manual input at the device is possible as well.
Which media can be assigned?
Every continuous meter: electricity, gas, water, heat, steam, compressed air. For volumes such as units or kilograms there is the sister feature status to volume.
Can I place an alarm on the consumption per status?
Yes. An alarm reports when the standstill consumption exceeds a limit, the energy per order sits above the calculation or the consumption during setup leaves the usual range.
Goes well with this
Is status to feed the right fit for your task?
Describe your starting point and your goal — we get back to you with a concrete recommendation of matching features and solutions, plus a price indication.
Configure your solution