eco2lot smartcalc · Shows how efficiently work was done

KPI

500 kWh is a lot or a little — depending on what was produced with it. The KPI puts consumption and output in relation and makes shifts, lines, products and sites comparable.

What is a KPI in eco2lot?

In eco2lot, a KPI is determined from two counters. For the respective evaluation period, the sum of counter A is divided by the sum of counter B: 500 kWh power consumption divided by 1,000 produced units yields 0.5 kWh per unit. For a day, daily sums are used, for a month, monthly sums, for a year, yearly sums — this way meaningful KPIs arise instead of snapshots. Typical examples: kWh per unit, kWh per tonne, m³ of water per unit, gas per tonne, costs per product unit and the seasonal performance factor of a heat pump.

How it works

The calculation scheme

Calculation scheme KPI Sum of power consumption 500 kilowatt-hours divided by sum of production 1,000 units yields 0.5 kilowatt-hours per unit. Σ 500 kWh Power meter (period) ÷ Σ 1,000 units Volume counter (period) = 0.5 kWh / unit KPI
Per period: sum of the power meter divided by sum of the volume counter. 500 kWh ÷ 1,000 units = 0.5 kWh per unit. For the month the same calculation applies with monthly sums.
In detail

What is inside the KPI

What the KPI is

  • The ratio of two counters per evaluation period
  • Always sum A ÷ sum B — never instantaneous value ÷ instantaneous value
  • Standard KPIs and customer-specific KPIs
  • Energy performance indicators (EnPI) with baseline for ISO 50001

Your benefitKPIs show efficiency — beyond consumption alone.

Which data it uses

  • Counter A: e.g. feed counter electricity, gas, water, heat
  • Counter B: e.g. volume counter units, tonnes, litres — or a second feed counter
  • The sums of both counters in the respective period

Your benefitBoth counters are usually already there; the KPI connects them.

What eco2lot calculates

  • kWh per unit, kWh per tonne, m³ per unit, gas per tonne
  • Costs per product unit (with price data point)
  • Heat quantity ÷ electrical energy = efficiency of the heat pump; over the year the seasonal performance factor (SPF)
  • Per 15 minutes, hour, shift, day, week, month, year

Your benefitOne KPI for every level — from the shift to the year.

What benefit arises

  • Make shifts, lines, products and sites comparable
  • Detect deviations before the monthly bill shows them
  • Evidence for ISO 50001 continuously instead of at the audit
  • Alarm when a target value is exceeded

Your benefitThe KPI is the value that is talked about in the operation.

One level deeper

Typical KPIs

Examples of how two counters become a statement.

kWh per unit

Power consumption of the line ÷ produced piece count per shift. If the value rises at the same piece count, something is running along — idling, setup, fault.

m³ of water per tonne

Water consumption ÷ produced tonnes per day. Shows whether cleaning programmes and production are in proportion.

Seasonal performance factor (SPF)

Generated heat quantity ÷ electrical energy over one year: 30,000 kWh ÷ 10,000 kWh = 3.0. Looked at per day or month, the same calculation yields the performance factor of the period.

Costs per product unit

Energy costs ÷ production volume — the KPI that sales and controlling understand.

Your outcome

Afterwards you can …

  • You know kWh per unit, per tonne or per product per shift, day and month — automatically.

  • You compare lines, products and sites on a basis that factors out size differences.

  • The seasonal performance factor of your heat pump is available continuously — with monthly values that show deviations early.

Frequently asked questions

What you should know about the KPI

How is a KPI calculated?

From two counters: for the evaluation period, the sum of counter A is divided by the sum of counter B. Daily sums for a day, monthly sums for a month. This way reliable values arise instead of random snapshots.

Why are sums divided and not instantaneous values?

Instantaneous values fluctuate: a standstill of one minute would drive the KPI to infinity. The sum over the period smooths this and describes what was actually worked in this period.

Can I calculate the seasonal performance factor of my heat pump?

Yes: heat meter divided by power meter. Over the whole year this is the seasonal performance factor (SPF), for shorter periods the performance factor of this period. The monthly values show early when something runs out of line.

Does the KPI support ISO 50001?

Yes. Energy performance indicators (EnPI) with baseline and target tracking arise continuously from the live data. This way the evidence for the audit is ready without being gathered afterwards.

Can I calculate costs per unit?

Yes. The energy price is stored as a data point or linked with the consumption by formula; the KPI divides the costs by the production volume.

Can I place an alarm on the KPI?

Yes — that is the most frequent alarm on calculated values. If kWh per unit, m³ per tonne or the performance factor of the heat pump leaves the limit range, eco2lot reports it immediately: upwards (inefficiency) and downwards (measurement error or missing volume).

Is the KPI the right fit for your task?

Describe your starting point and your goal — we get back to you with a concrete recommendation of matching features and solutions, plus a price indication.

Configure your solution