eco2lot smartcalc · Counts how often something happens

Event counter

How often did the press start today? How many faults did line 2 have in the month? How many switching cycles does the contactor have behind it? The event counter keeps count — and turns frequency into a KPI.

What is an event counter?

In eco2lot, an event counter counts how often an event occurs. The basis is a data point whose value changes — a status signal from 0 to 1 at every machine start or a fault message, for example. Every change is an event; the event counter delivers the number per evaluation period: 12 starts in this shift, 340 switching cycles in this month.

How it works

The calculation scheme

Calculation scheme event counter A signal changes several times from zero to one; every change is an event. Result: twelve starts in this shift. Status signal 0 → 1 → 0 → 1 → 0 → 1 …every change counts → count per period = 12 starts in this shift
A status signal changes between 0 and 1. Every change to 1 is an event; in this shift there are twelve starts. The number per period becomes the data point.
In detail

What is inside the event counter

What the event counter is

  • The number of events per evaluation period
  • Event = change of a data point, e.g. from 0 to 1
  • For starts, stops, faults, switching cycles, door openings, batch changes

Your benefitFrequency becomes measurable — with no tally sheet.

Which data it uses

  • One status or message data point
  • The time profile of this data point
  • Optionally the assignment to machine, line or plant

Your benefitThe signal is usually already there — from controller, contactor or sensor.

What eco2lot calculates

  • The number per 15 minutes, hour, shift, day, week, month, year
  • Sums over longer periods, such as switching cycles since commissioning
  • Comparison of shifts, machines and periods

Your benefitA signal becomes a statistic.

What benefit arises

  • Fault frequency per machine and shift
  • Switching cycles as the basis for maintenance intervals
  • Start-up frequency as a hint at cycle problems
  • Input for KPIs: faults per 1,000 units

Your benefitMaintenance by actual stress instead of by calendar.

Your outcome

Afterwards you can …

  • You know how often machines start, fault or switch — per shift, day and month.

  • Maintenance intervals follow switching cycles and operating starts instead of the calendar.

  • Fault frequency becomes a KPI, comparable across machines and shifts.

Frequently asked questions

What you should know about the event counter

What does an event counter count?

Every change of a data point that indicates an event — for example the change of a status signal from 0 to 1 at a machine start or the occurrence of a fault message. The result is the number per period.

What is the difference to the status time?

The event counter counts how often a state occurs; the status time measures how long it lasts. Both together give the picture: 12 faults with a total duration of 45 minutes.

Can I use switching cycles for maintenance?

Yes. The sum of switching cycles or starts over long periods is a direct measure of stress. An alarm on reaching a threshold reminds you of the maintenance.

Can I place an alarm on the number?

Yes. An alarm reports when a machine counts more than ten faults per shift, a contactor has reached the switching cycles for maintenance or a plant starts more often in an hour than usual.

Is the event counter the right fit for your task?

Describe your starting point and your goal — we get back to you with a concrete recommendation of matching features and solutions, plus a price indication.

Configure your solution