eco2lot Buildings · Run properties efficiently

Run your properties like a single building — centrally and transparently.

eco2lot Buildings brings meter readings, system states and indoor climate from all sites into one view. You compare consumption per square meter, spot outliers and react before the complaint arrives. And where building automation becomes a requirement, you get more out of it than a mandatory installation.

For: Multi-site retailers · Property managers · Municipalities · Facility management · Industrial campuses

  • Status and alarms per site at a glance
  • Consumption per m² comparable across all properties
  • Existing BMS, meters and sensors connected independent of the manufacturer
my.eco2lot.de · Buildings Portfolio
What is eco2lot Buildings?

eco2lot Buildings is the buildings area of the eco2lot platform and its building energy management system. It captures electricity, heat, cooling and water as well as the operating states of heating, ventilation, refrigeration, heat pumps, photovoltaics and charging points across all properties. It compares sites via KPIs such as consumption per square meter, reports faults and limit violations automatically — and thereby provides the central data, analysis and documentation layer that a building automation and control system needs.

The starting point

What slows down daily operations today

Sites are black boxes

Every property has its own meters, its own technology, its own paperwork. Which site is out of line only shows in the annual statement.

Meter readings cost site visits

Read, type, file: across many sites this adds up to days. Between two readings every excess consumption stays invisible.

Systems run badly without anyone noticing

A heating system in summer mode, a heat pump with weak efficiency, ventilation running non-stop: without central monitoring this only surfaces when someone is cold or pays.

New requirements are coming

Building automation is becoming a requirement for many non-residential buildings — in Germany, systems above 70 kW need a building automation and control system by the end of 2029. Treating this as a mere mandatory installation means paying twice: for the technology and for the benefit it leaves unused.

Your benefit

What eco2lot Buildings changes for you

Meet requirements in a way that pays off

One central data and analysis platform for the capabilities building automation rules ask for (in Germany § 56 GModG). Result: a retrofit that lowers operating costs from the first month instead of merely meeting a deadline.

Lower energy costs for good

Weekend operation, flow temperature too high, base load with the store closed, open windows while heating runs: eco2lot recognizes the pattern and names the site. Result: outliers in a weekly rhythm instead of the annual report.

Spot faults before anyone complains

Heating failed, meter sends no data, CO₂ limit exceeded, consumption jumps: alarm by push or email, with escalation and acknowledgement. Result: your team knows before the occupant does.

Fewer site visits and manual checks

Meters are read remotely, system states reported continuously. Technicians see state, errors, temperatures and history before the drive. Result: you go where you are needed — with the diagnosis in hand.

Compare all sites

One portal for one building, ten buildings or a hundred sites. Normalized KPIs: kWh/m², consumption per opening hour, per user, per heating degree day, CO₂ per m². Result: you know why one branch heats 30 % more than its twins.

Keep using existing technology

The BMS on site stays. eco2lot connects Siemens, WAGO, BACnet, M-Bus, Modbus and LoRaWAN on one platform. Result: investment protection and one standard for all buildings, regardless of manufacturer.

Features

What is inside eco2lot Buildings

Capture

  • Automatic remote meter reading (M-Bus, radio, LoRaWAN)
  • Connection of existing BMS (BACnet, Modbus, OPC UA)
  • Heat pump and heating data: flow/return, power, operating state
  • Indoor climate sensors (temperature, humidity, CO₂)
  • Manual entry and CSV import for the transition

Monitor

  • Operating states of heating, ventilation, refrigeration, heat pumps
  • Alarms on faults, limits and data outages
  • Deviation analysis: night operation, continuous running, base load
  • Escalation chains and acknowledgement
  • Traffic-light dashboards per site and portfolio

Report

  • Consumption per m² and property comparison
  • Target values per site
  • Consumption and cost allocation per unit
  • CO₂ calculation for reporting duties
  • Documentation for building automation requirements (in Germany §§ 56, 60a, 60b GModG)
  • Automatic portfolio reports in a fixed rhythm
  • Open interfaces: REST API, MQTT, export

All platform features in detail →

What it looks like

From the portfolio to the single meter

Real views from eco2lot: first the situation picture of all sites, then the KPIs of one building, then the limit at the meter that triggers the alarm.

Site
Site panel with KPIs

Devices, alarms and position at a glance — plus the list of all devices at this property with their status.

Alarms
All faults in one list

Heating failed, meter without data, limit exceeded: your team sees every message across all sites — with escalation and acknowledgement.

Meter alarm
Set a limit at the meter

A daily budget per meter is enough: if the heating runs through the weekend, eco2lot reports it — before the invoice does.

Data sources & integrations

Connects to what is already there

A BMS controls one building. eco2lot Buildings turns many buildings into a portfolio you understand and — within safety limits — control.

Building technology speaks many languages — from M-Bus meters and BACnet BMS to heat pump controllers and LoRaWAN radio sensors in older buildings. eco2lot Buildings connects them on one platform, independent of the manufacturer. Your existing technology stays in operation; eco2lot adds portfolio, analysis, alarms, reports and optimization on top.

M-BusBACnetModbus TCP/RTUOPC UALoRaWANMQTTREST APIHeat pump controllersEnergy and heat metersBMS extensionSub-metering
From practice

An example with numbers

Worked exampleMulti-site retailer40 sites
31 %
less heating energy at an outlier site — three months after the adjustment

In the portfolio comparison one branch uses a third more heating energy than comparable sites with the same floor area and weather. The time series shows: the heating runs through the weekend, the flow temperature is 7 K above the value of the twin branch. Schedule and heating curve are adjusted — remotely, with no site visit. The effect shows in the next monthly report. The figures are a typical worked example, not a single project.

Frequently asked questions

What you should know about eco2lot Buildings

What is eco2lot Buildings?

eco2lot Buildings is the buildings area of the eco2lot platform. It captures consumption, system states and indoor climate across all properties, compares sites via KPIs such as consumption per square meter and raises alarms on faults. It provides the data and analysis layer for building automation and runs on the shared data foundation of the platform.

Who is eco2lot Buildings for?

For everyone responsible for several buildings: multi-site retailers, property and real estate managers, municipalities and public institutions, facility management and industrial companies with a plant campus. The platform scales from one property to a portfolio with hundreds of sites.

Which buildings are affected by building automation requirements?

In Germany, § 56 GModG applies to non-residential buildings whose heating, combined heating/ventilation, air-conditioning or air-conditioning/ventilation system has a rated output above 70 kW. These buildings need a building automation and control system by 31 December 2029 where technically possible and economically reasonable. Other countries have their own rules under the EU Energy Performance of Buildings Directive. A look at the nameplates — or a conversation with us — clarifies whether your building is affected.

Does eco2lot Buildings cover all building automation requirements on its own?

eco2lot Buildings is an essential part of your system, but deliberately leaves local automation in the building where it is. The platform covers the data and analysis side: it monitors, logs and analyzes consumption, provides data via open interfaces, detects efficiency losses, informs about improvements and monitors indoor climate. Depending on the building, local control, sensors, actuators and lighting control come from your BMS or complementary components. The assessment of the individual case is up to your specialist planner.

Does eco2lot Buildings work with my existing BMS?

Yes. The building management system on site stays in operation and is connected via BACnet, Modbus or OPC UA. eco2lot Buildings adds the cross-site view that a local BMS cannot provide by design, opens up the data independent of the manufacturer and extends measuring points where they are missing.

Which meters can I read remotely?

Electricity, heat, cooling and water meters with an M-Bus or radio interface, plus existing meters via pulse or retrofit solutions. For distributed sensors without cabling, LoRaWAN is a good fit — a radio standard with long range and battery-powered sensors.

How does eco2lot support heat pump and heating system inspections?

The inspection by a qualified person remains mandatory where the law requires it. eco2lot delivers the long-term data it needs: seasonal performance factor from measured electricity and generated heat, heating curve, flow and return temperatures, operating hours, compressor starts, bivalent operation and faults — documented over the whole heating season. In Germany, §§ 60a and 60b GModG also provide exemptions for heat pumps under remote control and for heating systems with standardized building automation; whether they apply is something you clarify with your specialist planner or energy consultant.

Do I have to retrofit all buildings at once — or can I start with a pilot building?

You can proceed step by step. A proven entry is two to three pilot properties with remote reading of the main meters and BMS connection. The portfolio comparison then grows site by site — on the same platform, with predictable costs.

How do I get started with eco2lot Buildings?

Via the configurator: state the number of sites and your starting point, receive a recommendation and a price indication. A proven entry is two to three pilot properties with remote reading of the main meters — the portfolio comparison grows site by site afterwards.

Which eco2lot solution fits your operation?

Put your solution together from the areas you need today — you can expand at any time. We get back to you with a concrete recommendation and a price indication.

Configure Buildings
Esc oder Klick außerhalb schließt